Jobey Shellmoor

This is second out of the lot of eleven I picked up sometime back. Jobey Pipes they’ve been around for a long time and changed hands a time or two for more info Pipedia they have the history in a click. I couldn’t lock down a precise year for this one but nevertheless shes a beaut, large chambered pot for along smoke, something I look for in a pipe . The pipe itself is stamped on the underside Jobey Shellmoor, Extra, Imported Briar and English Para on the stem.

The Restoration. 

Upon inspection she was a solid pipe nothing too troubling, rim tar, thin cake, stem chatter, impressions, oxidation and this funky inner tube that looked as if someone tried to chew it off. The toughest part would be the inner tube it was glued or epoxied in place.

Starting with my Pipnet reamer and the smallest attachment I began reaming back the old  cake, working my way up to the largest attachment. The chamber was so large that the final attachment could not reach the inner walls, I finished up with 400 grit sandpaper to complete the chamber.

Next I applied a generous amount of Method Wood For Good polish to the rim and left it upside down on a make-up pad and allowed the polish to penetrate the build-up. Once the polish softened the build-up it was removed with a children’s toothbrush and Q-Tips.At this time I gave the stummel a wipe down with Method polish, a rag and a children’s toothbrush to remove any debris in-bedded in the crags.

 I cut off the end of the mangled inner tube with snips and using a 1/8 inch bit tightened in my drills chuck I hand turned the stem until all of the aluminium tube was removed.

I gave the internals of the stummel and stem a good cleaning with EverClear, shank/mortise brushes, Q-Tips and stiff/soft pipe cleaners. Cleaning until the final pipe cleaner came out as it went in.

Next I removed the oxidation from the stem using non-bleach Soft Scrub, I applied the Soft Scrub to the stem and left it aside so the Soft Scrub could penetrate the oxidation. Once the the Soft Scrub turns from white to a brownish color its time to scrub vigorously with a rag until the oxidation is removed, applying more Soft Scrub as needed, holding the stem under natural light will help to see if all oxidation was removed.

The tooth impressions would need filling, I sanded the area of the indentations with 400 grit sandpaper and cleaned with an EverClear dampened rag to remove any sanding dust before filling. I mixed thick black CA glue and charcoal powder together to form a paste, then applying it to the impressions with a toothpick, hitting it with accelerator to set the patch. I left it overnight to cure. After allowing time to cure I removed the excess with needle files and sandpaper.

 Before hitting the wheel I ran the stem though the various grits of micro-mesh pads.

Complete.

I finished her up on the wheel with white diamond, a few coats of carnauba and micro-fiber hand buffing. Buffing the stem with blue compound and carnauba.

Thanks for taking a look.

Tim-