DINKY is the only stamping on this 4 inch pipe, the only other marking is the word Mexico on the underside of the stem. The stamping is the same as the Dr.Plumb line of DINKY pipes so I would assume its a second or perhaps just an older make as most of the pipes in the Christmas lot are from the 80’s or 90’s. The shape is definitely similar.
The pipe was in good shape, light chatter and oxidation, rim build up and light cake.
The chamber was on the small side, I had to utilize the PipNet and Castleford reamers to remove the cake. The chamber was free of any defects.
With the chamber complete I moved to the rim build up, I applied Method Good For Wood Polish to the rim and left aside to brake down the accumulation of tar and char. Once the build up softened I was able to remove the residue and some of the darkening using Q-Tips.
Next was the internal cleaning of the stem and stummel, using EverClear, Q-Tips, shank/mortise brushes and stiff/soft pipe cleaners I scrubbed the airway, mortise and chamber with EverClear until my final pipe cleaner came out free of debris.
The oxidation wasn’t bad on this little guy, I applied non-bleach Soft Scrub to the stem and left aside to penetrate the oxidation, once the Soft Scrub turned from white to a Brownish color I scrub with a rag adding more Soft Scrub as needed until all oxidation was removed (Holding the stem under natural light will help to see if all oxidation has been removed) I used Q-Tips dipped in Soft Scrub to get the oxidation around the bit and in the concave of the saddle bit stem.
After removing the oxidation the stem look good aside from some light chatter at the bit, I tapped off the bulk of the stem to keep my sanding in one area. I sanded the bit with micro-mesh 1500-2400 wet and 3200-6000 dry, then removing the tape to polish with the final two micro-mesh pads 8000-12000.
I finished up on the wheel with white diamond, a few coats carnauba and a round on a nude wheel. Buffing the stem with blue compound and carnauba, Hand buffing with a microfiber cloth just before the photos.
You must be logged in to post a comment.